Prediction model of sulfur end-point content for oxygen converter based on neural network; 将该方法应用于转炉终点磷含量预报模型,取得了较好的结果。
Recent developments of computer control for oxygen converter abroad-b. 国外氧气转炉计算机控制的新发展。
Oxygen converter gas recovery process 氧气转炉煤气回收法
The Arcon is a recently developed combination of a top-blown oxygen converter and a DC arc furnace with a single electrode, which can alternate with the top oxygen lance. 电转炉是新近开发的将氧气顶吹转炉与直流电弧炉相结合的技术,其电极与顶吹氧枪可交替使用。
At present, the percentage of the steel productivity of oxygen converter, including LD and other related new technologies, to the total gross steel productivity seems to remain stably at ca, 60% in the world. 目前,世界上氧气转炉(包括LD法及其派生的新工艺)炼钢的产能在总粗钢产能中的比例似平稳定在60%左右。
A way for reducing the load of Tor-sional vibration of basic oxygen converter 降低氧气转炉扭转振动载荷的途径
A flue gas-purifying system is a part of an oxygen top-blown converter, which should not be neglected. 烟气净化系统是氧气顶吹转炉炼钢中不可忽视的一部分。
The content and temperature of molten metal are homogeneous, and smelting process is stable for combined blowing oxygen converter. 采用顶底复合吹炼工艺后,不仅钢水成分和温度更均匀、吹炼更平稳、而且钢水终点残余锰含量提高。
Predictive Model of Terminal Oxygen Content of Combined Blowing Oxygen Converter Based on MATLAB Neural Network 基于MATLAB神经网络的复吹转炉终点氧含量的预报模型
A model of optimized dephosphorization in the primary blowing period for top-blown oxygen converter 氧气转炉吹炼前期的最佳化脱磷工艺基础
Gunning technique for oxygen converter lining 氧气转炉炉衬的喷补技术
Analysis and Simulation of niobium extraction process in a bottom-blown oxygen converter& a computer investigation 氧气底吹转炉提铌过程铌行为分析与模拟的计算机研究
Some aspects of computerized process control and administration of oxygen converter steelmaking 浅论我国氧气转炉炼钢计算机控制与管理问题
Automatic control system of oxygen top-blowing converter is introduced. And a chief description of the hardware configuration, controlling function and realization of key technology is made. 介绍了氧气顶吹转炉的自动化控制系统,对该系统的硬件配置、控制功能以及关键技术的实现作了主要描述。
The thesis briefly expounds the equipments and the refining technology of Vacuum Oxygen Decarburization Converter ( VODC). 简述了真空吹氧脱碳转炉(VODC)的设备和精炼技术。
In this paper, some developments of computer control methods for oxygen converter are outlined. 本文对近年来国外氧气转炉计算机控制的新发展作了综述。
The oxygen converter gas recovery process has been applied at some steelworks in China. However, it varied in effect in the steelworks. 氧气转炉烟气回收工艺(简称OG工艺)已在我国一些转炉钢厂应用,但效果不一。
Control and Prediction of Endpoint Oxygen Content of Combined Blowing Oxygen Converter 复吹转炉终点氧含量的控制与预报
CONSIDERATIONS ON DEVELOPMENT OF CHINA'S OXYGEN CONVERTER STEELMAKING TECHNIQUE IN 1990s& Speech at the 7~ ( th) annual meeting of the Steelmaking Association of China Metal Society 90年代我国氧气转炉炼钢技术发展的一些意见&1992年10月在中国金属学会炼钢学会第7届年会上的发言
Complete sets of automation system for medium and small basic oxygen converter ( A) 中小型氧气转炉成套自动化系统(上)
The software system of microcomputer application in top blown oxygen converter steel-making process 转炉冶炼操作微机应用的软件系统丙烯腈反应器在线操作优化软件及其应用
The Theoretical Analysis of the Speed of the Dephosphorization and Desulfur-ation of the Oxygen Top-Blown Converter 从理论上分析氧气顶吹转炉的脱磷与脱硫的速率
Oxidation behavior of chemical elements and mathematical model of v-extraction process in oxygen converter 氧气转炉吹钒过程元素氧化规律及数学模型
Combined Dynamic and Static Model of Steelmaking Process in Oxygen Converter 氧气转炉炼钢过程复合动、静态数学模型研究
Software of Materials Balance and Heat Balance Calculation for Steelmaking with Oxygen Converter 氧气转炉物料平衡和热平衡电算软件
Technical Progress of Oxygen Converter Steelmaking in China 中国氧气转炉炼钢技术的进步
Metallurgical Effect of 80 t Combined Blowing Oxygen Converter 80t顶底复合吹炼转炉的冶金效果
Considerations on degree of desulphurization and turndown desulphurizing capacity of top blown oxygen converter 顶吹氧气转炉气化脱硫率和终点脱硫能力的研究探讨
In this paper, deoxidation effect of Si-Al-Ba-Ca complex deoxidizer cored wire for 80t oxygen converter is analysed. 分析了80t氧气转炉应用Si-Al-Ba-Ca包芯线的脱氧效果,比较了用喂Al线和CaSi线时对脱氧、钢质、工艺的影响。
It may be as a reference for bottom blown, side blown and combined blown oxygen converter, argon/ oxygen vessel and submerged blown oxygen open-hearth. 可供底吹、侧吹和复吹氧气转炉,以及氩/氧炉和埋入式吹氧法平炉参考。